Packaging machine, packaging machine price, packaging machine manufacturer
1. Purpose
This machine uses plastic or plastic aluminum foil film as packaging material to process liquid, solid, powdery paste food, grain, fruit, pickles, preserved fruits, chemicals, medicines, electronics Components, precision instruments, rare metals, etc. are vacuum packed. Vacuum-packed items can prevent oxidation, mold, insects, rot, moisture, and extend the shelf life. It is especially suitable for tea, food, medicine, stores, research institutions and other industries. It has the advantages of beautiful appearance, compact structure, high efficiency, easy operation and so on.
2. Main technical parameters
Model
Power
Production per time
Dimensions
Kilogram/time, package/time
/>
Jin/time, bag/time
Jin/time, bag/time
3. Instructions for use
Vacuum time Adjust the vacuum time, usually seconds , depending on the vacuum gauge after work. Generally, just call for vacuum indication.
Heating time: Adjust the heating time, usually seconds, depending on the material of the vacuum bag. If it is a thicker bag, the heating time can be appropriately extended. If it is a thinner bag, the heating time can be adjusted less. You can try it specifically. Depends after one pack. For continuous use, the heating time should be reduced after a short period of use.
, the cooling time is generally adjusted to seconds or more. The time can be adjusted longer for thick bags and less for thin bags.
, the fuse tube is equipped with a power fuse.
When the button is working, push the button to the power position. When not working, push the button to the stop position. If the bag is found to be displaced during work, the button can be moved to the deflation position. Return the vacuum gauge to zero, turn up the organic plate cover, and readjust the position of the bag before working.
The vacuum gauge indicates the degree of vacuum in the barrel, which is generally used to achieve the purpose of sealing.
For operation, please refer to the "Instructions for Use" on the right side of the machine.
Four Conventional Machine Adjustments
There is a travel switch in the middle behind the organic board. If the machine fuse is intact and the button is in the power position, and the organic board does not work when pressed, you can use your hand to press the travel switch. If the machine has When working, you can take off the back panel and adjust the travel switch upward. Make sure the organic plate can press against the travel switch.
The heating wire, heating tape and wire holder should move freely. You can hold the wire holder with your hands to prevent the power cords at both ends from getting stuck. If the heating tape is wrinkled, you can remove it and lay it flat again. If the tape is If it is damaged, it should be replaced in time to avoid affecting the sealing quality.
The heat-resistant adhesive strip has a soft adhesive strip on the organic board, which can be removed, turned over, installed and flattened to seal the date. Then we can remove the year, month, day and numbers and install them according to the date we need. If the rubber strip is burned out, it should be replaced in time.
Oil level: Replace the vacuum oil after the machine has been used for several hours, and add oil to the marked oil level. Normally, if the oil level is too high or too low, the vacuum of the machine will be affected.
Five commonly used accessories for this machine
, heat-resistant tape, fuse, heating wire
Due to different production batches of specific models, the above pictures are for reference only. For details, please contact our sales staff for details Verify.
Toll Free Sales Telephone
Packaging machine, packaging machine price, packaging machine manufacturer